IAPMO RESEARCH AND TESTING, INC.
4755 East Philadelphia Street, Ontario, California 91761-2816 • 909.472.4100 Fax 909.472.4244 • www.iapmort.org
 
ANAB IAPMO R&T  
 
IAPMO R&T  
IAPMO R&T Product Listing

IAPMO Research and Testing, Inc. is a product certification body in which its product certification system includes inspection and testing of samples taken from the supplier’s stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier’s factory and/or warehouses as well as the assessment of the supplier’s Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
This IAPMO R&T Listing is current as of 11/05/2025

Product: EPA WaterSense High Efficiency Showerheads File No. K-16468
Issued To: JAMES ENTERPRISE INC.
1981 ASPEN CIRCLE
PUEBLO CO 81006
Identification: Each product shall be marked per the marking requirements in the latest version of their applicable performance standard. The products shall bear the maximum flow rate value in gpm and L/min as specified by the manufacturer.

The product packaging shall be marked with the maximum flow rate value in gpm and L/min as specified by the manufacturer, and the minimum flow rate value in gpm and L/min at 45 psi.

The flow rate markings shall be in gpm and L/min in two or three digit resolutions. The product packaging shall bear the EPA WaterSense label.
Characteristics: Products are manufactured in compliance with the applicable requirements of the EPA WaterSense® Specification for Showerheads. To be installed in accordance with the manufacturer's installation instructions.

Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory’s compliance to the applicable requirements of ISO/IEC 17025.
Products are certified to the following standard(s):
  EPA's WaterSense Specification for Showerheads (Version 1.1, 07-26-2018 edition)

 

MODELS:

Certification DateBrand NameModel NameModel NumberMaximum Rated Flow Rate (gpm)
5/14/2024BOROUX™Shower headBX-SH-ADJ1.8

 

This IAPMO R&T Listing is current as of 11/05/2025